Application Advantages
? Eco-friendly, 100% solid contents, solvent-free composition
? High filler contents, cost-effectiveness
? Resistance to chemicals, oil and water
? Good toughness, high hardness
? Provides good adhesion between both primer and topcoat
? Increases overall properties of the concrete floor, including abrasion, compression and impact resistances
? Can be applied on fresh, old concrete surface
Application Procedure
While applying Kingcoat FIC-800SF coat, surface preparation is the most important part. Remove all the loose materials to expose the base surface. Wash the surface with plenty of water. A 10% muriatic acid solution wash should follow. Again wash the surface with plenty of water. Let the surface dry to saturated surface dry (SSD) condition. Fill all the cracks, honey-combs, voids etc, using cement mortar or our Kingbond repair compound. Let the surface dry completely and polish it with grinding leveling. Apply a coat of Kingcoat FP-200SF liberally by brush or roller over the surface. Allow the surface to be touch-dry. Mix the A and B parts of Kingcoat FIC-800SF thoroughly, to get a uniform consistency. Trowel the first coat over this primer coat. Allow the coat to cure for 12 hours. Again trowel the second coat over the first coat, preferably in a perpendicular direction to the first coat, and so on until the coating thickness. Let the system cure for 24 hours. Protect the treatment during the curing period from mechanical disturbances, water splashes, direct sunlight & heat.
Application Areas
? Heavy-duty industrial manufacturing facilities, warehouses, airports
? Chemical and pharmaceutical plants
? Food processing and dairy plant flooring
? Clean rooms, laboratories, show rooms, garages
? Institutional facilities, schools, hospitals
? Shop, non-skid floors