Application Advantages
? Eco-friendly, being water based composition
? Excellent self-leveling properties
? Breathable
? Can be applied on flesh as well as old concrete
? Excellent abrasion resistance
? Excellent scratch resistance
? Resistance to chemicals, oil and water
? Creates joint-less, dustproof, easy to clean surface
? Forms silk-matt finish
Application Procedure
While applying Kingcoat SLF-1800WB coat, surface preparation is the most important part. Remove all the loose materials to expose the base surface. Wash the surface with plenty of water. A 10% muriatic acid solution wash should follow. Again wash the surface with plenty of water. Let the surface dry to saturated surface dry (SSD) condition. Fill all the cracks, honey-combs, voids etc, using cement mortar or our Kingbond repair compound. Let the surface dry completely and polish it with grinding leveling. Apply a coat of Kingcoat FP-400WB liberally by brush or roller over the surface. Allow the surface to be touch-dry. Mix the A and B parts of Kingcoat SLF-1800WB thoroughly, to get a uniform consistency. Apply the Kingcoat SLF-1800WB layer over this primer coat by a notched trowel and spiked roller. Allow the layer to cure for 24 hours, after which the treatment is suitable for foot traffic. Protect the treatment during the curing period from mechanical disturbances, water splashes, direct sunlight & heat. Full cure time is 7days from installation on the substrate. Application thickness can be form 1mm to 5mm depending upon functional requirements.
Application Areas
? Industrial manufacturing facilities, warehouses, airports
? Chemical and pharmaceutical industries
? Food processing and dairy plant flooring
? Car park, basement, non-skid floors
? Institutional facilities, schools, residences, hospitals
? Commercial traffic floors